Vitilan Electric Bike Blog

Why Is My E-Bike Getting Harder to Pedal? Common Causes and Troubleshooting Guide

by wangziru on Nov 04, 2026

Why Is My E-Bike Getting Harder to Pedal? Common Causes and Troubleshooting Guide

An e-bike that once felt easy to pedal can gradually become harder to ride, even with the motor assistance switched on. This does not necessarily mean the motor is faulty. Tyre pressure, brake friction, chain wear, bearing condition and the electrical assistance system can all affect how smoothly an e-bike rides. Rather than immediately replacing the battery or motor, it is better to identify where the resistance is coming from and work through the possible causes in the right order.

First, Identify the Problem: Increased Mechanical Resistance or Reduced Motor Assistance?

This is the most important step in the entire troubleshooting process.

An e-bike that becomes harder to pedal usually falls into one of three categories:

  1. Increased mechanical resistance: The wheels, brakes, chain or drivetrain have developed a problem, making the bike less efficient to pedal.
  2. Reduced motor assistance: The mechanical components are working normally, but the motor is providing less assistance than before, meaning the rider has to put in more effort.
  3. Changes in riding conditions: Additional weight, headwinds, gradients or different road surfaces can make riding harder without necessarily indicating a fault with the bike.

The following table can help narrow down the cause:

What You Notice

Areas to Check First

Next Step

The bike feels heavy even when pushing it

Tyres, brakes and wheel bearings

Check wheel rotation and brake friction

The bike rolls normally, but pedalling feels difficult

Chain, gears, crankset and bottom bracket

Inspect the drivetrain

Pedalling feels normal without assistance but harder when assistance is switched on

Motor assistance system

Check assistance level, sensors and display

Pedalling feels particularly difficult in one gear

Gear system

Check chain engagement with the cassette

Resistance develops after riding for a while

Brakes, bearings and electrical system

Look for signs of abnormal heat

One important point: difficulty pedalling with the power switched off does not automatically mean there is a mechanical fault. Different rear hub motor designs, freewheel mechanisms and mid-drive motor systems can all affect how an e-bike feels when the assistance is not active.

A more reliable approach is to assess how the bike behaves when pushing it, pedalling and using motor assistance, rather than relying on just one test.

If the Wheels Do Not Spin Freely, Check the Tyres, Brakes and Bearings First

If the bike already feels difficult to push, start by inspecting the wheels. Problems in this area are often relatively easy to identify and do not require dismantling the motor or drivetrain.

1.Is the tyre pressure below the recommended range?

Low tyre pressure is one of the easiest problems to overlook.

When a tyre is underinflated, it deforms more as it contacts the ground, increasing rolling resistance. You may notice that the bike feels heavier and requires more effort to maintain your usual riding speed.

Schwalbe recommends checking tyre pressure at least once a month. Even without an obvious puncture, inner tubes gradually lose air over time.

Here is how to check it properly:

  • Use a tyre pressure gauge rather than relying on how the tyre feels when pressed by hand.
  • Check the minimum and maximum pressure markings on the tyre sidewall.
  • Adjust the pressure according to rider weight, luggage and road conditions.
  • Never exceed the pressure limits specified by the tyre and rim manufacturers.

Higher pressure is not always better. A higher pressure can generally reduce rolling resistance on smooth roads, while a lower pressure can improve comfort and grip in certain conditions. The aim is to find a suitable balance.

2. Are the brake pads rubbing against the disc rotor?

Disc brakes should release properly when the brake lever is no longer engaged. However, if the calliper is misaligned, the rotor is warped or the pistons are not retracting correctly, the brake pads may remain in contact with the rotor.

Common signs include:

  • One wheel feels noticeably harder to push.
  • You hear continuous rubbing from the wheel while it rotates.
  • The brake area becomes unusually hot after riding.
  • The bike slows down more quickly than it used to when coasting.

With the e-bike switched off and securely supported, you can carefully lift the wheel and turn it slowly to check for persistent rubbing.

It is important to distinguish between minor disc contact noise and continuous braking resistance. The number of times a wheel spins on its own is not enough to determine whether the brakes are faulty.

If you notice significant resistance, unusual heat or reduced braking performance, stop riding and have the brakes inspected by a qualified technician. Do not dismantle hydraulic brake callipers or touch a disc rotor immediately after use.

3. Could the wheel bearings be causing the resistance?

If tyre pressure is correct and the brakes are not rubbing, but the wheel still does not rotate smoothly, the wheel bearings may need attention.

Worn, contaminated or poorly lubricated bearings can increase rotational resistance.

Look for the following signs:

  • A rough sensation when the wheel rotates.
  • Noticeable sideways movement in the wheel.
  • Intermittent resistance or catching during rotation.

If the wheel has excessive play or does not rotate smoothly, avoid dismantling the hub yourself. This is particularly important with rear hub motors, where the axle, motor cables and internal components must be handled according to the manufacturer's repair instructions.

If Pedalling Feels Heavy, Check the Chain, Gears and Crankset

If the bike pushes normally but pedalling has become increasingly difficult, the drivetrain is another area worth inspecting.
The chain, cassette, derailleur, crankset and bottom bracket work together to transfer pedalling power. A problem with any of these components can affect how smoothly the bike rides.

1. Is the chain poorly lubricated or worn?

The chain is constantly exposed to dust, dirt, mud and moisture. Without proper cleaning and lubrication, dirt can build up and cause dryness, stiffness and poor drivetrain performance.

Pay attention to the following:

  • Rust on the chain.
  • A noticeably dry chain surface.
  • Black, greasy dirt and heavy contamination.
  • Individual links that bend or fail to move freely.
  • Repeated stiffness or catching while pedalling.

If the chain is simply dirty or poorly lubricated, clean it with a suitable bicycle drivetrain cleaner. Allow it to dry before applying an appropriate bicycle chain lubricant, then wipe away any excess.

If the chain is worn, it needs to be measured rather than judged by appearance alone.

Park Tool provides the following general chain replacement reference points:

Chain Type

General Wear Replacement Reference

Single-speed chains

1.0%

5–10-speed chains

0.75%

11–13-speed chains

0.5%

For example, a typical 7-speed drivetrain can use the 0.75% reference for 5–10-speed chains. However, always prioritise the specific recommendations provided by the chain manufacturer.

Chain wear can affect shifting performance and accelerate wear on the cassette and other drivetrain components. Using a chain wear checker regularly can help prevent unnecessary damage and repair costs.

2. Is the gear system working correctly?

If pedalling becomes noticeably harder in just one gear while the others feel normal, the gear system deserves closer attention.

Possible causes include:

  • Derailleur misalignment.
  • A bent derailleur hanger.
  • Poor chain engagement with the cassette.
  • Stiff or damaged chain links.
  • Worn or damaged cassette teeth.

For example, if all seven gears used to shift smoothly but certain gears now feel unusually difficult to pedal in, sometimes accompanied by chain skipping, this should not simply be dismissed as a riding technique issue.

If the problem occurs in specific gears, have the derailleur adjustment checked. Increasing motor assistance is not a proper solution to an underlying drivetrain problem.

If you are unsure how mechanical gears affect pedalling effort, read our guide to choosing the right gear when climbing on an e-bike to understand how different gears work and when to use them.

3. Could the crankset or bottom bracket be creating resistance?

If the chain and gears appear to be in good condition but pedalling still feels heavy, the crankset and bottom bracket should be checked.

Different components can produce different symptoms:

Component

Possible Signs of a Problem

Pedal bearings

Pedals do not rotate smoothly or have excessive play

Crank arms

Loose installation or noticeable movement while pedalling

Bottom bracket bearings

Rough crank rotation, stiffness or unusual play

With the bike securely supported, check whether the crank arms have noticeable looseness or excessive movement.

If the crankset feels stiff, the bearings are loose or there are signs of unusual wear, have a qualified technician inspect the components. Do not attempt to remove the bottom bracket without the correct tools and installation torque specifications.

If the E-Bike Still Feels Heavy with Motor Assistance, Check the Sensors and Electrical System

If the tyres, brakes and drivetrain appear to be working normally but the bike still feels harder to ride with motor assistance switched on, the electrical assistance system needs further investigation.

Not every assistance problem means the motor itself is faulty. The assistance level, sensors, brake cut-off signals and speed sensor can all affect motor output.

1. Have the assistance level or display settings changed?

Start by checking the assistance level shown on the display.

For example, if you normally ride using a medium or high assistance level but have accidentally switched to a lower setting, the bike may suddenly feel much harder to pedal.

Also check:

  • Whether the bike has accidentally been switched into zero-assistance mode.
  • Whether the assistance level matches your usual setting.
  • Whether the display shows any error codes.
  • Whether the bike limits assistance under certain conditions.

If the issue is simply a change in settings, restoring your usual assistance level may improve the riding experience.

2. What is the difference between a torque sensor and a cadence sensor?

Understanding this distinction is important when troubleshooting an e-bike.

The two sensors work differently and should not be diagnosed in the same way.

Feature

Torque Sensor

Cadence Sensor

What it detects

The force applied by the rider when pedalling

Crank rotation

How assistance responds

Adjusts assistance according to pedalling force

Activates assistance based on pedalling movement

Possible fault symptoms

Motor assistance does not match pedalling effort

Delayed or inconsistent assistance after pedalling begins

If a torque sensor sends incorrect signals, the motor may fail to provide the expected assistance even when the rider increases pedalling force.

If a cadence sensor or its magnet becomes misaligned, motor assistance may fail to activate correctly or may become intermittent.

These symptoms can help narrow down the possible cause, but they do not confirm that a sensor is faulty. Further inspection is needed.

3. Could the brake cut-off switch be continuously activated?

Some e-bikes have a brake cut-off function. When the system detects a braking signal, motor assistance is temporarily disabled.

If the sensor on a brake lever or its associated wiring develops a fault, the system may continue detecting a braking signal even when the brakes are released. This can prevent the motor from providing normal assistance.

In this situation, the mechanical brakes may not show obvious signs of rubbing, but the motor assistance can still be affected.

If your bike has this feature, check whether the display shows a brake status indicator and contact the service team to have the relevant wiring and sensors inspected.

4. Is the speed sensor working correctly?

Some e-bikes use a magnet mounted near the wheel or crank, together with a speed sensor, to measure riding speed.

If the magnet becomes loose, moves out of position or the sensor wiring develops a fault, the bike may read speed incorrectly. On some models, this can also affect motor assistance.

If the speed shown on the display suddenly becomes inaccurate or motor assistance starts cutting in and out, the speed sensor should be included in the inspection.

If none of these basic checks reveal a problem but motor assistance is still noticeably weaker, the controller, electrical connections and motor system may need further inspection.

If your bike powers on normally but provides no motor assistance at all, read our guide to what to check when an e-bike turns on but the motor does not work.

Do not short-circuit sensors, dismantle the controller or modify motor settings as a way of testing the system.

Extra Weight, Headwinds and Road Conditions Can Also Make Riding Harder

Not every increase in pedalling effort means that something is wrong with the bike.

Sometimes the bike itself is working perfectly well, but the riding conditions have changed.

Additional weight

If you have recently started carrying more belongings, fitted a basket or regularly ride with extra luggage, the total weight the bike needs to move will increase.

This is particularly noticeable when starting from a standstill or climbing hills, when the rider may need to put in more effort.

Headwinds and different road surfaces

Riding the same route with a tailwind can feel very different from riding into a headwind.

Road surfaces also matter. Tarmac, gravel and muddy tracks create different levels of rolling resistance. If you have recently changed your route, the bike may simply be dealing with greater external resistance.

If most of your riding takes place in urban environments, you can also explore the VITILAN City E-Bike Collection to see the different configurations available for everyday city riding.

Cold temperatures

When temperatures drop in winter, the available performance of lithium-ion batteries can be affected. Motor assistance may therefore feel different compared with riding in warmer conditions.

However, reduced battery performance in cold weather is not the same as mechanical resistance caused by a sticking component.

If your e-bike feels less responsive in cold weather, check the battery condition, display information and assistance behaviour before assuming the battery is damaged.

The following table can help distinguish changes in riding conditions from potential faults:

Change in Conditions

Does It Necessarily Indicate a Fault?

What to Do

Carrying significantly more luggage

No

Reduce unnecessary weight

Frequently riding into headwinds

No

Take wind direction into account

Switching from tarmac to gravel

No

Allow for increased rolling resistance

Noticeably reduced tyre pressure

Needs checking

Adjust to the recommended range

Increasing resistance on the same route with similar loads

Worth investigating

Check the mechanical and assistance systems

Motor assistance remains weak when switched on

Needs checking

Inspect settings and the electrical system

Follow These Steps to Troubleshoot an E-Bike That Is Harder to Pedal

If you are unsure where the problem is coming from, there is no need to start dismantling components straight away.

Work through the following basic checks in order.

Step 1: Identify when the problem occurs

First, think about when the bike started becoming harder to pedal:

  • Did it happen suddenly or gradually?
  • Does the bike also feel heavy when you push it?
  • Is pedalling still difficult with assistance switched off?
  • Does the problem affect every gear or only certain gears?
  • Have you recently removed a wheel, replaced brake pads or cleaned the drivetrain?

These details can help narrow down the possible cause.

Step 2: Check the tyres and wheels

Check whether tyre pressure is correct and look for any obvious wheel deformation or contact with the mudguards.

If possible, securely support the bike and check whether the wheels rotate freely.

If a wheel is noticeably stuck, do not continue riding.

Step 3: Inspect the brakes

Check whether the brake pads are continuously rubbing against the disc rotor.

If you have recently removed a wheel, transported the bike or replaced brake components, pay particular attention to whether the wheel has been installed correctly.

If the brakes are not releasing properly or braking performance has deteriorated, have them inspected by a qualified technician.

Step 4: Check the chain and gear system

Look for rust, dryness or visible damage on the chain.

Think about whether the resistance occurs only in certain gears. If so, the derailleur and drivetrain may need further inspection.

If you have a chain wear checker, measure the chain rather than relying on its appearance alone.

Step 5: Check motor assistance

If there are no obvious mechanical problems, check the assistance level, display information and motor response.

If assistance is noticeably weaker or an error code appears, record the details and contact the service team.

Step 6: Record your findings instead of replacing parts unnecessarily

After completing the checks, make a note of which components appear to be working normally and which areas still show signs of a problem.

If you cannot identify the cause, provide your findings to a qualified technician rather than purchasing a replacement motor, controller or battery as a trial.

When Should You Stop Riding and Contact a Technician?

Some issues can be identified through basic visual checks, but others should not be investigated by continuing to ride.

Stop riding if you notice any of the following:

  • A wheel is noticeably jammed or cannot rotate properly.
  • The brakes are continuously rubbing or braking performance has significantly decreased.
  • The crankset or bottom bracket is noticeably loose or stiff.
  • The motor produces unusual vibrations, becomes excessively hot or delivers noticeably abnormal power.
  • The battery is swollen, leaking, unusually hot or producing a burning smell.
  • Electrical cables are visibly damaged or show signs of burning.

If the battery becomes unusually hot, starts smoking or shows other signs of thermal runaway, do not continue riding or charging the bike. Do not attempt to dismantle the battery. Move away from the bike and follow local emergency safety guidance.

If you need to contact VITILAN customer support, prepare the following information in advance:

Information Needed

Details

Bike model

Full model name and version

Symptoms

Difficult pedalling, wheel resistance or reduced assistance

When it started

When the issue appeared and whether it has become progressively worse

Conditions when it occurs

While pushing, with assistance switched off, with assistance switched on or in a particular gear

Recent maintenance

Whether wheels, brake pads or other components have been replaced

Photos or videos

Wheels, brakes, display and the affected components

If you own a VITILAN U3 electric bike, you can also provide the relevant product page, model version and frame information when contacting customer support. This can help the team identify the correct configuration and compatible replacement parts. The product page is useful for identifying the model, but it does not replace an actual fault inspection.

Providing this information is more useful than immediately requesting a replacement component, as it helps the service team narrow down the problem.

How to Prevent Your E-Bike from Becoming Harder to Pedal Again

Once the problem has been identified and repaired, regular maintenance can help prevent it from returning. Many issues that make an e-bike harder to pedal do not develop overnight. They build up gradually through regular use.

You do not need to carry out a complicated inspection after every ride, but a few simple habits are worth maintaining.

Check tyre pressure regularly

Check tyre pressure at least once a month using a pressure gauge. Adjust it according to the tyre markings, the bike manufacturer's recommendations and the total load. If you ride frequently or regularly carry heavier loads, check it more often.

Keep the chain clean and lubricated

After riding in the rain, on muddy roads or in outdoor conditions, remove dirt and debris from the chain. Allow it to dry before applying a suitable bicycle chain lubricant.

Shimano's technical guidance recommends regularly cleaning the chain and gears with an appropriate cleaning agent. Avoid strong acidic or alkaline cleaners, as these can damage the chain and its connecting components.

Pay attention to brake condition

If the wheels do not rotate smoothly, the brakes continue to rub or the braking feel changes, do not ignore it. Brakes are essential for riding safety and can also be a source of unwanted resistance.

Check the gear system regularly

Look out for chain skipping, poor shifting and unusual resistance in specific gears. If shifting becomes slow or inaccurate, have the rear derailleur and drivetrain inspected.

If your bike has been in use for several years and repair costs are increasing, or you are considering a model better suited to your everyday routes, explore the VITILAN Electric Bike Collection to see the different models, configurations and intended uses.

Frequently Asked Questions

Why is my e-bike still difficult to pedal when the power is switched off?

If pedalling remains difficult with the power switched off, possible causes include brake friction, low tyre pressure, poor chain lubrication or increased drivetrain resistance. However, different motor designs can also affect how an e-bike feels when the assistance is inactive. Start by checking the wheels, brakes and drivetrain, then consider the type of motor fitted to your bike.

Why is my e-bike easy to push but difficult to pedal?

This can be related to the gear selection, chain, crankset or bottom bracket. Check whether the chain is stiff, whether the derailleur is working correctly and whether there is unusual resistance while pedalling. If the problem only occurs in certain gears, pay particular attention to the gear system.

Why does my e-bike become harder to pedal after riding for a while?

Possible causes include increasing brake friction, accumulated dirt on the chain, falling tyre pressure or changes in motor assistance. If the bike feels normal at the beginning of a ride but becomes noticeably harder to pedal later, also look out for abnormal component heating or mechanical resistance that develops as parts warm up. Do not use this symptom alone to identify a specific fault.

Can I simply increase the motor assistance if my e-bike becomes harder to pedal?

Increasing motor assistance is not a recommended solution. If the bike has brake friction, low tyre pressure or drivetrain resistance, additional assistance will make the motor work harder without removing the underlying mechanical problem. Identify the source of the resistance first, then decide whether an assistance adjustment or repair is needed.

Conclusion

An e-bike that becomes harder to pedal does not necessarily have a faulty motor or battery. Tyre pressure, brake condition, chain wear, the gear system and motor assistance signals can all affect how the bike feels on the road.

The most important step is to distinguish increased mechanical resistance from reduced motor assistance, then work through the wheels, drivetrain and electrical system in order.

Problems that can be resolved through basic checks do not require expensive replacement parts. However, issues involving brakes, bearings, the motor or battery safety should be handled by a qualified technician.

Tags:

Leave a Comment

Your email address will not be published.